A Community by the River

Borough of Brielle, NJ

November 22, 2017

November 21 2017


You may notice Water Department crews working at hydrants and see water running down the street. Your first thought may be that we are ignoring our own philosophy of conserving water. We flush water lines through the use of hydrants, which is an important preventive maintenance activity. Although it may appear to waste water, the process is part of a routine maintenance program necessary to maintain the integrity of the water system allowing us to continue to deliver the highest quality water possible to our residents.
As a result of the line flushing process, residents in the immediate vicinity of the work may experience temporary discoloration of their water. This discoloration consists primarily of harmless silt and air and does not affect the safety of the water. If you experience discoloration in your water after crews have been flushing in your neighborhood, clear the pipes in your home by running your water faucets in your home a few minutes. We recommend using the tub or outside faucet.
Frequently Asked Questions:
Q: Why does the water system need to be routinely flushed?
A: The Town’s water distribution system is a complex network of pipes and storage tanks where sediment and deposits may naturally accumulate over time. If not removed, these materials may cause water quality deterioration, taste and odor problems, or discoloration of the water. Water may also stagnate in lesser used parts of the distribution system. This can result in degraded water quality.
Q: When does flushing occur?
A: Flushing this Fall takes place for approximately a two week period beginning November 15 and ending on or about November 30. Flushing crews will be working during the overnight between 10:00pm and 6:00am. We do this work at night to minimize the impact on our residents.
Q: Is the Water Department the only ones that flush the lines?
A: Generally, the Water Department performs flushing activities to clear the lines and to take pressure tests for the Fire Department and insure that the hydrants function properly. It is important to know that periodic, often unexpected, repairs to the water system are necessary throughout the year (leaks, water main breaks, and hydrant replacement) which may necessitate the need to open a fire hydrant as part of the repair process. Any time a hydrant is opened residents should expect water discoloration in the vicinity. Hydrants are also opened by the Fire Department for both training and firefighting activities; again this will result in water discoloration.
Q: What should I do when I see town crews flushing hydrants in my area?
A: If you see a town crew flushing hydrants while driving, PLEASE DRIVE CAREFULLY. You may also want to delay any laundry washing until the crew is finished and you have checked your water for discoloration.
Q: What should I do after the flushing?
A: If the tap water is used during flushing, it could come out full of sediment and discoloration. If you encounter discolored water, shut the water off and wait several minutes. After waiting, check for clarity by running cold water for a few minutes allowing new water to work its way into your pipes. If not, wait a few more minutes and check again. We recommend using a tub or outside faucet to clear the line. In some cases, you may experience slight discoloration for a few hours. This discoloration only affects the appearance of the water; it does not affect the taste or water quality.
Q: What should I do if my water pressure or volume seems low after flushing?
A: Check your faucet and washer screens for trapped debris.
Q: Why does the water look funny after hydrant flushing?
A: When a hydrant is opened, there will always be temporary incidences of discolored water containing fine sediment particles. There is no health hazard associated with discolored water. Allow a few hours for discoloration to dissipate. To verify the water has settled, allow your cold water tap to run a few minutes. If the discoloration persists for more than twenty-four (24) hours, please contact our Water Department at (732) 528-6600 ext. 5127
Q: Is it Okay to drink the sediment-laden or discolored water during temporary disturbance events?
A: It is recommended that water users wait until the water has cleared before using it for potable (drinking) purposes.
Q: What is the silt in the water system after flushing?
A: Water contains minerals and these minerals react with the inside of the pipe to produce the by-product. This chemical reaction between the pipe and water is normal and natural process. This process can occur on the inside of the pipe and prevent adequate volume of water flow. The flushing process removes much of this by-product.
Q: What will happen if hydrants are turned on or off too quickly?
A: This will cause “water hammer”, which is a pressure surge or wave when water in motion is forced to stop or change direction suddenly. The pressure wave can cause major problems, from noise and vibrations to pipe collapse. In home plumbing, this is experienced as a loud banging resembling a hammering noise. Water Department employees have received instruction on how to operate hydrant valves slowly to avoid hammer.